Sharp PN-HM851 Operation Manual page 34

Menu Items
nSCHEDULE
You can set the time to switch the monitor on and off.
Set this function with SCHEDULE in the SETUP menu. (See
page 27.)
SCHEDULE
– –/– –/– – – –
(2)
(1)
No. POWER DAY OF THE WEEK
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
1. Press the or
number, and press the
2. Set the SCHEDULE. (See the description below.)
Press the or button to select items, and press the
button to change the setting.
3. Press the ENTER button.
SCHEDULE becomes effective.
(1)
●: SCHEDULE effective
-: SCHEDULE not effective
(2) POWER
ON: Switches the monitor on at the specified time.
OFF: Switches the monitor off at the specified time and puts
the monitor in standby mode.
(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.
0: ONLY ONCE
Executes the SCHEDULE once on the specified day.
Specify the day of the week to execute the SCHEDULE.
1: EVERY WEEK
Executes the SCHEDULE on the specified day of the
week every week. Specify the day of the week to execute
the SCHEDULE.
Periodic setting such as "Monday through Friday" is also
possible.
2: EVERY DAY
Executes the SCHEDULE every day regardless of the day
of the week.
(4) TIME
Specifies the time to execute the SCHEDULE.
Set the time on a 12-hour basis. (Factory default)
(5) INPUT
Specifies the input mode at power-on. If you don't specify
this the input active at the last power-off will appear.
When START INPUT MODE is set to a value other than
LAST INPUT MODE, the input mode configured for START
INPUT MODE will be set.
34
E
D-SUB
– – – – –:– –:– – – –
(3) (4) (5)
TIME INPUT BRIGHT
– – – – – – – – – –
- :
– – – – – – – – – –
-
:
– – – – – – – – – –
- :
– – – – – – – – – –
- :
– – – – – – – – – –
-
:
– – – – – – – – – –
-
:
– – – – – – – – – –
- :
– – – – – – – – – –
- :
OK:[ENTER] CANCEL:[RETURN]
button to select the SCHEDULE
button.
(6) BRIGHT
Sets the brightness when changing the screen brightness at
a specified time.
Caution
• Do not switch off the main power after setting the
(6)
SCHEDULE.
• Specify the correct date and time. (See page 27.)
– –
SCHEDULE does not function unless the date and time are
– –
specified.
– –
• Check regularly that the set date and time are correct.
– –
– – • When a temperature abnormality occurs and the backlight
– – brightness is reduced, the brightness is not changed even
– –
if a schedule set to BRIGHT is executed.
– –
TIPS
• Up to 8 SCHEDULE items can be registered.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
• A SCHEDULE that has a large number has precedence
over that of a small number when schedules overlap.
or