Sharp PN-HM851 Operation Manual page 12

Connecting Peripheral Equipment
8. DisplayPort output terminal
• The screen displayed on this monitor and the audio output
from this monitor can be output to an external device.
• Use a commercially available DisplayPort cable
(conforming to the DisplayPort standard) that supports
4K.
• Outputting HDCP-encrypted video requires an external
device which supports HDCP.
• This terminal can be used to make a daisy chain
connection* by connecting same series monitors to each
other through the DisplayPort input terminal of each
monitor.
*: Up to 4 monitors.
TIPS
• The length of the signal cables or surrounding environment
may affect the image quality.
• The output screen may not be displayed properly. In this
case, turn off the power to all the monitors connected in a
daisy chain and then turn the power on again.
• When connecting monitors in a daisy chain set NO SIGNAL
AUTO INPUT SEL. to OFF.
• Video output is disabled in the following cases:
When the power is turned off.
When the monitor is in input signal waiting mode.
• This terminal does not support HDR signals.
The output device's screen will not be displayed properly.
9. Audio output terminal
• The output sound varies depending on the input mode.
• The volume of the output sound can be fixed by setting
AUDIO OUTPUT of AUDIO OPTION on the SETUP
menu.
• It is not possible to control the sound output from the
audio output terminals with the AUDIO menu.
10. Wireless LAN antenna terminal
• Attach the supplied wireless LAN antennas.
11. LAN terminal
• You can control the monitor from a computer on a network
by connecting a commercially available LAN cable
between this terminal and a network.
12. USB port
• This is used in APPLICATION mode. For details, see the
Software Guide.
13. microSD card slot
• This is used in APPLICATION mode. For details, see the
Software Guide.
12
E