Sharp PN-HM851 Operation Manual page 27

nSETUP
DATE/TIME SETTING
Display the date and time.
When select SET, input mode change to APPLICATION, and you can set the date and time.
When APPLICATION is set to DISABLE, SET does not appear. Set in the displayed screen.
TIME FORMAT (when APPLICATION is ENABLE)
Set the time display format.
Select the display format, and select SET.
DATE/TIME FORMAT (when APPLICATION is DISABLE)
Set the date/time display format.
SCHEDULE (See page 34.)
You can turn the power on/off and change the screen brightness at a specified time.
LANGUAGE
Set the display language for the menu screen.
INPUT SELECT
DisplayPort STREAM
Set how DisplayPort is used.
If a device that do not support DisplayPort1.2 is connected, set to SST1.
SST1 ....Use as single stream (DisplayPort1.1).
SST2 ....Use as single stream (DisplayPort1.2).
HDMI MODES
HDMI MODES settings change how the content displayed is processed and decoded.
MODE1 is default and will support most common color spaces and other encoding signals.
MODE2 should be used for YCbCr 4:2:0 at 4K Vsync 50/60Hz signals or when non 4K devices are connected and content
onscreen are not what is expected.
CEC SETTING
HDMI CEC LINK
AUTO ........ HDMI CEC function is used.
If the device connected to the HDMI input terminal supports CEC, the input mode of the monitor changes to
HDMI when playback starts on the device.
Set the operation of the CONTENT MENU button with CONTENT MENU BUTTON.
OFF ........... HDMI CEC function is not used.
When the input mode is other than APPLICATION, the input mode changes to APPLICATION when the
CONTENT MENU button is pressed.
AUTO POWER ON
This can be set when HDMI CEC LINK is set to AUTO.
If the device connected to the HDMI input terminal supports CEC, you can specify whether or not the monitor power turns on
when the device power is turned on.
CONTENT MENU BUTTON
This can be set when HDMI CEC LINK is set to AUTO.
Set the operation of the CONTENT MENU button in other than APPLICATION mode.
CEC............................................. Operates as an HDMI CEC function button.
SWITCH TO APPLICATION ........ Changes the input mode to APPLICATION.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
Menu Items
27
E