Siemens SINUMERIK 840C Operator's Manual page 95

4 Machine
Note
Note
4-28
The axis position change in the "Traversed" axes setting is effective
• after selection of the axis
• after the position is saved.
The entries in the input fields "Next block number" and "Block number
difference" also apply to the NCK editor.
Switch to the selection screen "Axis selection". The axes configured for the
machine are displayed along with toggle fields with the selection YES/NO.
You use the toggle fields to decide which axes are used in the teach-in (see
examples 1 and 2).
Machine manufacturer
The settings "Axes" and "Axis selection" are generally modified or
overwritten by the PLC application program. Please refer to the manufacturer's
documentation for more information.
Press RECALL to return from the selection screens to the edit mode display.
The axes can also be selected in the input line independently of the "Axis
selection" screen. If you select the axes using the input line, the parameters
entered in the selection screen have no effect. The selection screen is not
modified by the entries in the input line.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99