1 Introduction - SINUMERIK 840C and its Operation
1.4
Structure of the user interface
MS-Windows
Area Switchover
Fig. 1-3
Area Switchover
1-6
The SINUMERIK 840C is a CNC control with an MMC based on the MS
Windows operating system. You will therefore find on the screen the same
familiar elements that you have encountered when working with other MS-
Windows applications.
The Area Switchover is the central program on the SINUMERIK 840C OEM
Version for Windows. You can use it to select 5 hierarchically organized
functional areas. The Area Switchover is activated by the following key:
You can subsequently open the individual menus by selecting the items on the
menu or softkey bars and activate the various user areas from there.
6FC5198-6AA60-0BP1
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99