Examples - Siemens SINUMERIK 840C Operator's Manual

4 Machine
4.2.5.9

Examples

Edit mode example
4-40
Positions 1 to 5 are approached using JOG keys and saved in the part program
with the softkey GENERATE BLOCK. The editing cursor is placed on the
block with position 3. The missing positions 7 to 9 are subsequently
approached using JOG keys and similarly entered in the part program with the
softkey GENERATE BLOCK.
Position to be taught
2
1
Fig. 4-17 Teach-in in edit mode
It is possible to edit the part program at any point in any order without
traversing.
6FC5198-6AA60-0BP1
3
Place cursor before
7
8
the 4th block
9
4
5
6
Traverse with travel keys/
handwheel
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99