Siemens SINUMERIK 840C Operator's Manual page 259

8 Diagnosis
Page
Paging time
Display by priority
Display by time
8-6
Fig. 8-4 Configure alarm/message line
The following settings can be made individually for the alarm and message line
in this dialog box.
If this check box is marked the individual alarms and messages in the alarm
and message line are paged.
If this box is not marked, either the alarm with the highest priority or the last
alarm to be output is displayed.
Defines the paging time of the texts in the alarm and message line. Paging is
only performed if the check box "Page" is marked..
These options specify whether the alarm or message with the highest priority or
the last alarm or message to be output are displayed. This selection is only
made if the check box "Page" is not selected.
Machine manufacturer
The above settings can be disabled via the PLC.
The above settings are only activated if the function "Page from PLC" is not
active. The status of this function is displayed in the top field of the dialog
box.
This status display is only updated when the dialog box is opened.
Note
The settings above take effect as soon as the dialog box is closed.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99