Siemens SINUMERIK 840C Operator's Manual page 102

01.99
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
Switch to the "Block structure/settings" selection screen.
Use the arrow keys to move between the toggle fields:
− Block number
− Axes
and the input fields:
− Next block number
− Block number difference.
Press the selection key to display the different settings in the toggle fields.
You can enter the values in the input boxes using the keyboard and pressing the
INPUT key.
Switch to the "Axis selection" screen and enter the desired settings. You will
find a detailed description of these selection screens in the previous sections.
Press RECALL to exit the selection screens.
Now start the part program by pressing NC START. The program executes
until the selected breakpoint.
The program can also be started from the TEACH IN basic display. You can
subsequently switch to teach block by block.
The breakpoint block (N15 in the figure) is highlighted on a black background.
The teach block is highlighted in colour (N20 in the figure).
6FC5198-6AA60-0BP1
4 Machine
4-35