Program Parameters; Tool Offsets - Siemens SINUMERIK 840C Operator's Manual

5 Parameters
5.3

Program parameters

Program
pa ram ete rs
TO TO
geo + base wear
5.3.1

Tool offsets

Program
pa ram ete rs
5-8
With the PROGRAM PARAMETERS softkey you select the area.
On selecting PROGRAM PARAMETERS, the softkey bar appears.
Zero Angle of
offset rotation
The following data is stored in the PARAMETER/PROGRAM
PARAMETERS area:

• Tool offsets

• Zero offsets
• Angles of rotation
• R parameters (channel-specific and central)
• Plane.
You press the PROGRAM PARAMETERS softkey. The tool offsets
(geo + base, i.e. P0 to P4 and P8 and P9) are displayed on the screen:
Fig. 5-4 Tool offsets
6FC5198-6AA60-0BP1
R param. R param.
central chan. spec.
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99
Search