Connect The Drive To A Pc - YASKAWA CIPR-GA50C series Technical Manual
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
3.7 Connect the Drive to a PC
3.7
Connect the Drive to a PC
The drive has a mini-B type USB port.
You can use a USB cable (USB 2.0, type: A - mini-B) to connect the drive to a type-A USB port on a PC. After
you connect the drive to the PC, you can use Yaskawa DriveWizard Industrial software to monitor drive
performance and manage parameter settings.
A - PC
B - Type-A connector
Yaskawa recommends that you use a USB cable with connectors connected with shielded wires.
92
C - USB 2.0, type A - mini-B cable
D - Mini-B type connector
Figure 3.47 Connect to a PC (USB)
Figure 3.48 Recommended USB Cable
YASKAWA SIEPC71061753A GA500 Technical Manual
Advertisement
Table of Contents
Troubleshooting
