Table of Contents
Advertisement
Menu
BACKUP
INITIALIZE
INFORMATION
Installing software (INSTALL menu)
To install the BZS-7061A operation software, which is supplied on three
floppy disks, and the software for option boards, use the following procedure.
1
In the SYSTEM menu, press F10 (INSTALL).
The INSTALL menu appears.
F1
2
Press F2 (DVS7250 SYSTEM), F3 (BKDS-7370) or F4 (BKDS-7444),
and F10 (EXEC), in that order.
The function key indications change as follows.
F1
Menus accessed from the SYSTEM menu (Continued)
Functions
• Saving the setup data in
nonvolatile memory
• Making the setup data write-
protected or not
• Resetting the switcher and control
panel to the state at power on
• Clearing the switcher memory
and control panel memory and
initializing the switcher and
control panel based on the
default setup data
Displaying the software version
numbers
DVS7250
SYSTEM
F2
F3
F4
Function key indications in the INSTALL menu
F2
F3
F4
Function key indications in the INSTALL menu (after pressing F10)
Function key
F5 (BACKUP)
F6 (INITIALIZE)
F7
(INFORMATION)
F5
F6
F7
F8
F5
F6
F7
F8
See page
14-14
14-15
14-16
EXEC
F9
F10
YES
NO
F9
F10
(Continued)
14-5
Chapter 14 Setup
Advertisement
Table of Contents
