Table of Contents
Advertisement
6
When you selected F3 (M/E) or F4 (KEYER) in step 2, set F5 (XPT
DSBL) to ON or OFF. To copy or swap the cross-point button
selections, set this to OFF; in order not to copy or swap the cross-point
button selections, set this to ON.
7
To carry out a swap, press F8 (SWAP); to carry out a copy, press F10
(COPY).
This carries out the swap or copy.
To restore the state before a copy or swap
Press F1 (LAST X).
Copying Using Button Operations
There are simple button operations for the following copy operations:
• M/E copy
• Keyer copy
• M/E wipe copy
• Color background copy
Basic button operation
The basic button operation is to hold down the button assigned to the source,
then press the button assigned to the destination.
M/E copy button operation
For each M/E bank, use the SNAPSHOT button in the FlexiPad (see page
2-11).
Copying from the M/E-1 bank to the M/E-2 bank (example
operation)
Hold down the SNAPSHOT button in the M/E-1 bank, then press the
SNAPSHOT button in the M/E-2 bank.
Chapter 11 Copy and Swap Operations
11-5
Advertisement
Table of Contents
