Sony DVS-7250 Operation Software page 131

4
Adjust the mask source parameters.
When you have selected a box mask:
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
1 Softness
When you have selected a pattern mask:
Knob Parameter
1 Size
2 Softness
4 Pattern No.
a) The patterns are the same as wipe patterns 1 through 23. (See the Appendix "Wipe
Patterns" (page A-2)).
5
To invert the sense of the mask source, press F7 (MASK INVERT),
turning it on.
6
If you have selected a pattern mask, press F6 (MASK MODIFY) to
adjust the pattern modifiers.
The MASK MODIFY menu appears.
[CENTER]
POS
PATTERN
OFF
F1 F2 F3
Function key indications in the MASK MODIFY menu
When this menu is displayed, pressing F1 (PATTERN) allows you to
adjsut pattern parameters with knobs as in step 4.
Setting
Top edge position of box (0.00 to 100.00)
Left edge position of box (0.00 to 100.00)
Right edge position of box (0.00 to 100.00)
Bottom edge position of box (0.00 to 100.00)
Set the degree of edge softness (0.00 to 100.00)
Setting
Set pattern size (0.00 to 100.00)
Set the degree of edge softness (0.00 to 100.00)
Select pattern number (1 to 23)
ROTA-
ASPECT TION
MULTI
OFF OFF OFF
F4 F5 F6
Chapter 4 Basic Operations for Image Creation
a)
F7 F8 F9 F10
(Continued)
4-53