Table of Contents
Advertisement
Overview
Interface With VTR
Tape Transport Control by Same Operation as Effect
Execution
If you have first saved the three timecode values for the VTR start point, stop
point, and start offset point in a register, then you can control the VTR in the
same way as for a key frame effect.
To recall a register
To recall a register in which you have first saved the VTR start point, stop
point, and start offset point, in the numeric keypad section press the RCALL
button, then enter the number of the register. When the register is recalled,
the VTR is cued up to the start point.
To play the tape
To play the tape, press the RUN button in the key frame control panel.
To cue up to the start point
To cue up the VTR to the start point in the currently recalled register, press
the REWIND button in the key frame control panel.
13-8
Chapter 13 Interfacing With External Devices
Advertisement
Table of Contents
