Table of Contents
Advertisement
Basic Frame Memory Operations
7
8
9
10
11
6-10
Chapter 6 Frame Memory
Adjust the mask source parameters.
When a rectangular frame mask is selected:
Knob
Parameter
1
Top
2
Left
3
Right
4
Bottom
1
Softness
When a dedicated pattern is selected:
Knob
Parameter
1
Size
2
Softness
4
Pattern No.
Note
Patterns 24 ("circle"), 26 ("heart") and 27 ("star") are common to frame
memories 1 and 2. They cannot be used for the two frame memories
simultaneously.
To apply a pattern modifier to the selected pattern, press F10 (PATTERN
MODIFY).
The PATTERN MODIFY menu appears.
For details of the operation, see step 7 of the procedure in the section
"Using the main mask" (page4-52).
To invert the mask, set F9 (MASK INVERT) to "ON".
Press F4 (FREEZE MODE) to select the freeze timing.
FRAME: 1 frame (2 fields)
FIELD: 1 field
When you are ready to freeze the frame, press F1 (FREEZE).
This writes the freeze frame to memory.
Setting
Top edge position of box (0.00 to 100.00)
Left edge position of box (0.00 to 100.00)
Right edge position of box (0.00 to 100.00)
Bottom edge position of box (0.00 to 100.00)
Set the degree of edge softness (0.00 to 100.00)
Setting
Size of pattern (0.00 to 100.00)
Degree of edge softness (0.00 to 100.00)
Pattern number (1 to 27)
Advertisement
Table of Contents
