Table of Contents
Advertisement
Delay Setting
Setting the delay time
The delay time is the delay from the beginning of effect execution until the
first key frame, that is, until the effect proper begins. The delay is not
included in the effect duration, which therefore does not change when you
change the delay. Use the following procedure to change the delay time.
1
Press the EDIT ENBL button, turning it on.
2
Press the DELAY button.
3
Enter the numerical value in minutes, seconds and frames (mm.ss.ff)
from the numeric keypad, and press the ENTER button.
For example, enter 1.15 to set a delay of 1 second and 15 frames.
Chapter 8 Key Frame Effects
8-19
Advertisement
Table of Contents
