Changing Hmi Device Settings; Setting The Date And Time - Siemens SIMATIC HMI Operating Instructions Manual

Result
You cannot open the Control Panel or Windows CE taskbar without entering a password.
Procedure for deactivating password protection
Proceed as follows:
1. Delete the inputs in the "Password" and "Confirm password" text boxes.
2. Confirm your entries.
Result
Password protection for the Control Panel and the Windows CE taskbar is disabled.
6.6

Changing HMI device settings

6.6.1

Setting the date and time

Introduction
You can set the date and time on the HMI device. The HMI must be restarted in the following
cases:
● You have changed the time zone setting
● You have changed the "Daylight savings time currently in effect" check box setting
Requirements
You have opened the "Date/Time Properties" using the "Date/Time Properties"
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
The dialog closes.
Configuring the operating system
6.6 Changing HMI device settings
icon.
147