Setting The Double-Click - Siemens SIMATIC HMI Operating Instructions Manual

6.4.3

Setting the double-click

Introduction
You can start applications in the Control Panel and in Windows CE by double-clicking.
In the "Mouse Properties" dialog box you can change the following settings.
● The time interval between two clicks for a double-click
● The physical distance between two clicks for a double-click
A double-click corresponds to two brief touches in sequence.
Requirements
You have opened the "Mouse Properties" dialog with the "Mouse"
①
②
Procedure
Proceed as follows:
1. Double-click on the grid.
2. Double-click on the icon.
3. If the icon remains unchanged, double-click on the grid again.
4. Confirm your entries.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Icon for setting the double-click
Icon for testing the double-click
After one double-click the grid is shown in inverse colors.
If the double-click is valid, the icon is displayed as follows:
The dialog closes.
Configuring the operating system
6.4 Changing settings for operation
icon.
143