Locking The Charging Station - Siemens SIMATIC HMI Operating Instructions Manual

5.9.3

Locking the charging station

Introduction
The lock prevents unauthorized removal of the HMI device from the charging station.
①
②
③
Procedure for locking the charging station
Proceed as follows:
1. Slide the lock down to the appropriate cut-out in the charging station.
2. Turn the key by 90 degrees.
3. Remove the key.
Result
The charging station is locked. You cannot remove the HMI device.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Lock barrel with key
Lock
Hook for hooking in the HMI device
Operator controls and displays
5.9 Charging station
123