Connecting The Printer - Siemens SIMATIC HMI Operating Instructions Manual

Installation and connection
4.7 Connecting the HMI device
Connection graphic
The following figure shows the connection between the PLC and the HMI device.
See also
Interfaces of the HMI device (Page 76)
Communication (Page 32)
4.7.5

Connecting the printer

Introduction
Printers are connected to the HMI device via WLAN.
The current list of recommended printers for the HMI devices can be found on the Internet
under http://support.automation.siemens.com/WW/view/de/11376409.
Observe the supplied printer documentation when you connect the printer.
Connection graphic
Note
It is not possible to connect a printer to the HMI device's USB interface.
The following figure illustrates the connection between the HMI device and a printer.
80
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01