Siemens SIMATIC HMI Operating Instructions Manual page 155

①
②
③
④
⑤
⑥
⑦
Procedure
Proceed as follows:
1. Select the printer from the "Printer Language:" selection box.
2. In the "Port:" selection box, select the "Network:" interface.
3. In the "Network:" text box, enter the network address of the printer.
4. Select the paper format from the"Paper Size:" selection box.
5. Select the required radio button in the "Orientation" group:
6. Select the print quality.
7. If the printer selected can print in color and you wish it to do so, select the "Color" check
8. Confirm your entries.
Result
The settings for the printer have now been changed.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Selection boxd for the printer
Interface selection box
Network address of the printer
Paper format selection box
"Orientation" group with radio buttons for print orientation
Print quality check box
Color printing check box
– "Portrait" for portrait
– "Landscape" for landscape
– Select the "Draft Mode" check box if you wish to print in draft mode.
– Clear the "Draft Mode" check box if you wish to print with higher quality.
box.
The dialog closes.
Configuring the operating system
6.6 Changing HMI device settings
155