Setting The Character Repeat Rate Of The Screen Keyboard - Siemens SIMATIC HMI Operating Instructions Manual

①
②
1. If you want to switch between the numeric and alphanumeric screen keyboard, press
2. If you want to change the position of the screen keyboard, move it using the
3. If you want to increase the size of the screen keyboard, enlarge it to the size required
4. If you want to save the settings, press the "Save" button.
5. Close the screen keyboard by pressing the "Close Input Panel" button.
6. Confirm your entries.
Result
The screen keyboard settings have been modified.
See also
Operating the Control Panel (Page 137)
6.4.2

Setting the character repeat rate of the screen keyboard

Introduction
You can set the character repeat for the screen keyboard in the Control Panel.
Requirements
You have opened the "Keyboard Properties" dialog with the "Keyboard"
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
The appearance of the dialog box changes:
Button for closing the screen keyboard
Button for saving the screen keyboard settings
the key.
Release contact from the icon when the required position is reached.
using the icon. Release contact from the icon when the required size is reached.
The dialog closes.
Configuring the operating system
6.4 Changing settings for operation
icon.
icon.
141