D9412GV3/D7412GV3/D7212GV3
2
Upgrade GV3 Hardware and Programming
2.1
Receive Existing Control Panel Programming
NOTICE!
GV3 Series v8.11 and later Control Panels are not compatible with the D5200 Programmer.
2.1.1
Receive Existing Control Panel Programming with RPS
1.
2.
3.
2.2
Upgrade Hardware to a GV3 Series Control Panel
2.2.1
Prepare to Remove Existing Hardware
1.
2.
2.2.2
Remove the Existing Control Panel
1.
2.
Bosch Security Systems, Inc.
In RPS, double-click on the control panel name.
Click Connect. Once connected, the Panel Sync window opens.
Select the Recieve Panel Data option button and click OK.
Power down the existing control panel by disconnecting the battery and the AC power.
Remove the four removable terminal strips by tilting the strip up and outward.
Do not remove the wiring from the terminal strip.
Remove the lock down tab screw.
Lift up on the control panel to free it from the enclosure mounting hooks, and remove the
control panel from the enclosure it.
Quick Reference Guide
Upgrade GV3 Hardware and Programming | en
1 - Removable terminal strips
1 - Lock down tab
F01U170805 | 01 | 2010.11
7