Install The Gv3 Control Panel In The Enclosure; Replace The Terminal Strips - Bosch D9412GV3 Quick Reference Manual

8 en | Upgrade GV3 Hardware and Programming
2.2.3

Install the GV3 Control Panel In the Enclosure

1.
2.
NOTICE!
If the control panel was previously mounted using the screw hole configuration, the you must
re-mount the new control panel. The GV3 control panel mounting screw hole locations do not
align with the locations for older control panels.
2.2.4

Replace the Terminal Strips

1.
2.
F01U170805 | 01 | 2010.11
Place the GV3 Control Panel in the enclosure using the mounting skirt hook holes on the
back of the control panel and the mounting skirt hooks on the enclosure.
Replace the lock down tab screw.
Replace the four removable terminal strips by pushing them straight down until they snap
into position.
Connect the battery and AC power.
Quick Reference Guide
D9412GV3/D7412GV3/D7212GV3
1 - Mounting skirt hook holes
2 - Mounting skirt hooks
3 - Lock down tab
Bosch Security Systems, Inc.