Add System Users Locally With A Keypad; Add Users (Cmd 56) Using A Keypad; Add Card (Cmd 56) For Access Control Only Using A Keypad - Bosch D9412GV3 Quick Reference Manual

16 en | Add System Users Locally With a Keypad
7

Add System Users Locally With a Keypad

7.1

Add Users (CMD 56) Using a Keypad

Step Operator Entry
1 Enter Command 56
2 Enter passcode and press [ENT].
3 Enter the user number and press [ENT].
4 Enter
5 Enter
6 Enter the new user's passcode.
7 Re-enter the new passcode.
Table 7.1 Adding Users with Command 56
7.2

Add Card (CMD 56) for Access Control Only Using a Keypad

Step Operator Entry
1 Command 56
2 Enter passcode and press [ENT]
3 Enter the user number and press [ENT]
4 Enter
5 Next
6 Enter
7 Present the credential to the reader.
Table 7.2 Adding Cards with Command 56
NOTICE!
To use Add Card (CMD 56), you must program the Assign Door prompt within Command
Center Assignments with the D9210B door controller number. If you do not program the
Assign Door prompt, the keypad reads 9210 NOT READY.
F01U170805 | 01 | 2010.11
Keypad Response
Enter Passcode
Enter User #
USER # (default name text)
Change Passcode?
Enter New Code
Enter New Again
Code Changed
Keypad Response
Enter Passcode
Enter User #
USER# (default name text)
Change Passcode?
Add Card?
Present Card
Card Added
Quick Reference Guide
D9412GV3/D7412GV3/D7212GV3
Bosch Security Systems, Inc.