Manual
The printer performs iOS reconnection when the printer is powered on or it switches to online or
offline.
[Authentication]
Set the authentication level.
The options are as follows:
None
None
Level 2-1
PIN code authentication, service level, no encryption
Level 2-2
PIN code authentication, service level, encryption
Level 3
PIN code authentication, link level, no encryption
Level 4
Secure Simple Pairing compatible, service level, encryption (Can be communicated with devices
that are not compatible with Secure Simple Pairing)
[ISI]
Set the ISI communication parameter.
The setting range is from 0, or from 18 to 4096.
Set to a value that is higher than the ISW communication parameter setting value.
[ISW]
Set the ISW communication parameter.
The setting range is 0, or from 18 to 4096.
The setting range varies depending on the ISI communication parameter setting value.
Set to a value that is less than the ISI communication parameter setting value.
[PSI]
Set the PSI communication parameter.
The setting range is from 18 to 4096.
Set to a value that is higher than the PSW communication parameter setting value.
316
[PSI]