Cleaning Using The Cleaning Sheet - SATO FX3-LX Operator's Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

11. Close the dispenser frame.

Cleaning Using the Cleaning Sheet

The cleaning procedure using the cleaning sheet is as follows:

1. Make sure that the printer is powered off, and disconnect the power cord from the

AC outlet or remove the optional battery.

2. Press the cover open button (1) to open the top cover (2).

3. Remove the media if it is already loaded.

4. Cut the cleaning sheet to a width of about 8 cm (3").

5. Place the cleaning sheet (3) on the platen roller.

Align the rough side of the cleaning sheet adjacent to the top cover.

6. Close the top cover.

Push both ends of the top cover, and close it firmly until it clicks.