Adjusting The Media Stop Position - SATO FX3-LX Operator's Manual

Adjusting the Media Stop Position

Set the [Offset] in the [Printing] > [Advanced] > [Adjustments] menu to adjust the media stop position
(for cutter/dispenser/tear-off mode).
• The above cut reference position for printing indicates the label stop position when the
media sensor is set to Gap sensor.
• The tear-off and dispensing positions are adjustable in the same manner.
1. Tap
on the Home screen or Offline screen to show the [Settings] menu.
2. Input the password if it is enabled.
384
Adjusting the Media Stop Position