Table of Contents
Advertisement
When the [Printing] > [Auto-mode] function in the Settings mode is enabled, the print mode is set
automatically according to the status of the installed option. To select a print mode manually, disable
[Auto-mode] and select the print mode in the [Printing] > [Print Mode] menu.
Installing the Optional Linerless Kit
•
Do not connect or disconnect the power cord while your hands are wet. Doing so could
cause an electric shock.
•
The linerless platen roller and feed roller have protective stickers on them. Install the
rollers after peeling off the stickers.
1. Make sure that the printer is powered off, and disconnect the power cord from the
AC outlet or remove the optional battery.
2. Press the cover open button (1) to open the top cover (2).
3. Push the two tabs (3) toward the back to remove the inner cover (4).
86
Installing the Optional Linerless Kit
Advertisement
Table of Contents
