[Printing] Menu; [Label Length]; [Label Width] - SATO FX3-LX Operator's Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

[Printing] Menu

The following settings are available in the [Printing] menu:

Set the length of the media.

The setting range of the label length is 1 to 6000 dots.

The length of 1 dot is 0.083 mm (0.0033").

You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.

Set the label size to a value that includes the liner.

Set the width of the media.

The setting range of the label width is 1 to 960 dots.