Mapping Cos Values To Egress Queues - SMC Networks SMC6750L2 Management Manual

Web – Click Priority/Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click "Apply."
CLI – This example assigns a default priority or 5 to port 3.
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5

Mapping CoS Values to Egress Queues

This switch processes Class of Service (CoS) priority tagged traffic by
using four priority queues for each port, with service schedules based on
Weighted Round Robin (WRR). Up to eight separate traffic priorities are
defined in IEEE 802.1p. The default priority levels are assigned according
C S
LASS OF ERVICE
C
ONFIGURATION
3-68
3-121
2-55