Copying The Running Configuration To A File; Displaying Bridge Extension Capabilities - SMC Networks SMC6750L2 Management Manual

C
ONFIGURING THE

Copying the Running Configuration to a File

CLI – If you copy the running configuration to a file, you can set this file
as the startup file at a later time, and then restart the switch.
Console#copy running-config file
destination file name : 051902.cfg
/
Console#
Console#config
Console(config)#boot system config: 051902.cfg
Console(config)#exit
Console#reload

Displaying Bridge Extension Capabilities

The Bridge MIB includes extensions for managed devices that support
Multicast Filtering, Traffic Classes, and Virtual LANs. You can access these
extensions to display default settings for the key variables, or to configure
the global setting for GARP VLAN Registration Protocol (GVRP).
Command Attributes
• Extended Multicast Filtering Services – This switch does not
support the filtering of individual multicast addresses based on GMRP
(GARP Multicast Registration Protocol).
• Traffic Classes – This switch provides mapping of user priorities to
multiple traffic classes. (Refer to "Class of Service Configuration" on
page 2-53.)
• Static Entry Individual Port – This switch allows static filtering
for unicast and multicast addresses. (Refer to "Setting Static
Addresses" on page 2-30.)
• VLAN Learning – This switch uses Independent VLAN Learning
(IVL), where each port maintains its own filtering database.
2-20
S
WITCH
3-18
3-23
3-16