Show Ip Interface - SMC Networks SMC6750L2 Management Manual

Command Usage
A gateway must be defined if the management station is located in a
different IP segment.
Example
The following example defines a default gateway for this device:
Console(config)#ip default-gateway 10.1.0.254
Console(config)#
Related Commands
show ip redirects

show ip interface

Use this command to display the settings of an IP interface.
Default Setting
All interfaces
Command Mode
Privileged Exec
Command Usage
This switch can only be assigned one IP address. This address is used
for managing the switch.
Example
Console#show ip interface
IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,
and address mode: User specified.
Console#
Related Commands
show ip redirects
IP C
OMMANDS
3-53