Parity; Speed - SMC Networks SMC6750L2 Management Manual

C L
OMMAND INE

parity

Use this command to define generation of a parity bit. Use the no form to
restore the default setting.
Syntax
parity {none | even | odd}
no parity
• none - No parity
• even - Even parity
• odd - Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Command Usage
Communication protocols provided by devices such as terminals and
modems often require a specific parity bit setting.
Example
To specify no parity, enter this command:
Console(config-line)#parity none
Console(config-line)#

speed

Use this command to set the terminal line's baud rate. This command sets
both the transmit (to terminal) and receive (from terminal) speeds. Use the
no form to restore the default setting.
Syntax
speed bps
no speed
3-64
I
NTERFACE