C
L
OMMAND
INE
Command Mode
Privileged Exec
Example
Console#show queue cos-map ethernet 1/11
Information of Eth 1/11
Queue ID Traffic class
-------- -------------
0
1
2
3
Console#
map ip port (Global Configuration)
Use this command to enable IP port mapping (i.e., class of service
mapping for TCP/UDP sockets). Use the no form to disable IP port
mapping.
Syntax
map ip port
no map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
Example
The following example shows how to enable TCP/UDP port mapping
globally:
Console(config)#map ip port
Console(config)#
3-126
I
NTERFACE
1 2
0 3
4 5
6 7