Example
The following shows how to configure broadcast storm control at 600
packets per second on port 5:
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast packet-rate 600
Console(config-if)#
show interfaces status
Use this command to display the status for an interface.
Syntax
show interfaces status interface
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
I
C
NTERFACE
OMMANDS
3-75