Snmp Commands; Snmp-Server Community - SMC Networks SMC6750L2 Management Manual

SNMP Commands

Controls access to this switch from SNMP management stations, as well as
the error types sent to trap managers.
Command
snmp-server
community
snmp-server contact Sets the system contact string
snmp-server location Sets the system location string
snmp-server host
snmp-server enable
traps
show snmp

snmp-server community

Use this command to define the community access string for the Simple
Network Management Protocol. Use the no form to remove the specified
community string.
Syntax
snmp-server community string [ro|rw]
no snmp-server community string
• string - Community string that acts like a password and permits access
to the SNMP protocol. (Maximum length: 32 characters, case
sensitive; Maximum number of strings: 5)
• ro - Specifies read-only access. Authorized management stations are
only able to retrieve MIB objects.
• rw - Specifies read-write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Function
Sets up the community access string to
permit access to SNMP commands
Specifies the recipient of an SNMP
notification operation
Enables the device to send SNMP traps or
inform requests (i.e., SNMP notifications)
Displays the status of SNMP
communications
SNMP C
OMMANDS
Mode Page
GC 3-43
GC 3-44
GC 3-45
GC 3-45
GC 3-47
NE, 3-48
PE
3-43