Support Bracket - Heat & Glo FDN-5-PIER Installation And Operating Manual

B. Support Bracket
The hood must be supported at locations J,K and L
using .250-.20 UNC threaded rods. Temporary support
brackets are provided for installation.
See Figure 4.2.
1. Install the threaded rods in locations J, K and L as
noted in Figure 4.1.
2. Level the fireplace.
3. Ensure fireplace is fully supported and leveled and
then remove support brackets.
Caution! Risk of Injury! DO NOT remove support brack-
ets until fireplace is fully supported and level.

SUPPORT BRACKET

Figure 4.2 Support Bracket
Heat & Glo • FDN-4-PIER, FDN-5-PIER, FDN-6-PIER, FDN-7-PIER Installation Manual • 16400-9803 • 2/19
4 - FRAMING
11