Work Area Safety - Genie GS-2646 AV Operator's Manual

Operator's Manual

Work Area Safety

Work Area Safety
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Line Voltage
0 to 50KV
50 to 200KV
200 to 350KV
350 to 500KV
500 to 750KV
750 to 1000KV
Allow for platform movement, electrical line sway
or sag, and beware of strong or gusty winds.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
12
Obey all local and
governmental regulations
regarding required
clearance from electrical
power lines. At a
minimum, the required
clearance contained in the
chart below must be
followed.
Required Clearance
10 ft 3.05 m
15 ft 4.60 m
20 ft 6.10 m
25 ft 7.62 m
35 ft 10.67 m
45 ft 13.72 m
Keep away from the
machine if it contacts
energized power lines.
Personnel on the ground
or in the platform must not
touch or operate the
machine until energized
power lines are shut off.
GS-2646 AV • GS-2646 AV35
Second Edition • Second Printing
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity or the
maximum platform capacity of the platform
extension.
Maximum capacity
Model Platform
retracted
GS-264 AV 900 lbs
408 kg
GS-264 AV35
Platform retracted
Extension only
Platform extended
Platform Extension Maximum
only only occupants
600 lbs 300 lbs
272 kg 136 kg
Platform extended
Platform only
Part No. 1274894GT
3