Work Area Safety - Genie GS-2669 Operator's Manual

Operator's Manual

Work Area Safety

Work Ar ea Safety
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Line Voltage
0 to 50KV
50 to 200KV
200 to 350KV
350 to 500KV
500 to 750KV
750 to 1000KV
Allow for platform movement, electrical line sway or
sag, and beware of strong or gusty winds.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
6
Obey all local and
governmental
regulations regarding
required clearance from
electrical power lines. At
a minimum, the required
clearance contained in
the chart below must be
followed.
Required Clearance
10 ft 3.05 m
15 ft 4.60 m
20 ft 6.10 m
25 ft 7.62 m
35 ft 10.67 m
45 ft 13.72 m
Keep away from the
machine if it contacts
energized power lines.
Personnel on the ground
or in the platform must
not touch or operate the
machine until energized
power lines are shut off.
™
GS -2669BE • GS
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity or the
maximum platform capacity of the platform
extension.
Maximum capacity – GS-2669BE
Platform retracted
Platform extended – Platform only
Platform extended – Extension only
Maximum occupants
1500 lbs / 680 kg 300 lbs / 136 kg
Maximum capacity – GS-3369BE
Platform retracted
Platform extended – Platform only
Platform extended – Extension only
Maximum occupants
1000 lbs / 454 kg 300 lbs / 136 kg
™ ™
-3369BE • GS -4069BE
First Edition • Fourth Printing
1500 lbs 680 kg
1200 lbs 544 kg
300 lbs 136 kg
1200 lbs / 544 kg
1000 lbs 454 kg
700 lbs 318 kg
300 lbs 136 kg
700 lbs / 318 kg
Part No. 826570GT
4
4