Genie GS-2646 AV Operator's Manual page 45

Second Edition • Second Printing
Operational indicator codes
If the platform controls LED or ground controls
LCD diagnostic readout displays an operational
indicator code such as LL, the fault condition must
repaired or removed before resuming machine
operation. Push in and pull out the red Emergency
Stop button to reset the system.
LED Readout
LCD Readout
Operational Indicator Codes
Code Condition
LL Off-Level
OL Platform Overloaded
CH Chassis Mode Operation
PHS Pothole Guard Stuck
nd No Drive (option)
dE Deck Extended (PED only)
(lift and drive disabled)
Fd Function Disabled (all functions)
For further information, please consult the
appropriate Genie Service Manual. A code and a
description of a code can also be viewed at the
ground controls LCD display.
Part No. 1274894GT
Operation from Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Battery Level Indicator
Use the LED diagnostic readout to determine the
battery level.
Note: When a blinking LO code appears on the
platform controls LED display, the machine must
be taken out of service and charged, otherwise all
machine functions will be disabled.
GS-2646 AV • GS-2646 AV35
Operating Instructions
Operator's Manual
Full Charge
Half Charge
Low Charge
LO Flashing
43