Genie GS-2646 AV Operator's Manual page 15

Second Edition • Second Printing
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds on the chassis only when the
machine is on a severe slope.
If the tilt alarm sounds:
Lower the platform. Move the machine to a firm,
level surface. If the tilt alarm sounds when the
platform is raised, use extreme caution to lower the
platform.
Do not drive over 0.5 mph / 0.8 km/h with the
platform raised.
Part No. 1274894GT
Do not raise the platform
unless the machine is on
a firm, level surface.
GS-2646 AV • GS-2646 AV35
Work Area Safety
GS-2646 AV
Do not raise the platform when wind speeds may
exceed 28 mph / 12.5 m/s. If wind speeds exceed
28 mph / 12.5 m/s when the platform is raised,
lower the platform and do not continue to operate
the machine. Refer to instructional decal and serial
label for specific wind speed rating.
GS-2646 AV35
Do not raise the platform when wind speeds may
exceed 35 mph / 15.6 m/s. If wind speeds exceed
35 mph / 15.6 m/s when the platform is raised,
lower the platform and do not continue to operate
the machine. Refer to instructional decal and serial
label for specific wind speed rating.
Operator's Manual
Do not operate the
machine in strong or gusty
winds. Do not increase the
surface area of the
platform or the load.
Increasing the area
exposed to the wind will
decrease machine
stability.
Use extreme care and
slow speeds while driving
the machine in the stowed
position across uneven
terrain, debris, unstable or
slippery surfaces and near
holes and drop-offs.
13