Genie GS-2646 AV Operator's Manual page 42

Operator's Manual
Operating Instructions
Operation from Platform
1 Be sure the battery pack is connected before
operating the machine.
2 Turn the selector switch to platform control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 Press the lift function button.
On the LCD screen, a circle
below the lift function symbol
will turn on.
If the control handle is not moved within seven
seconds of pushing the lift function button, the
circle below the lift function symbol will turn off and
lift function will not operate. Press the lift function
button again.
2 Press and hold the function enable switch on
the control handle.
3 Machines equipped with foot switch: Press and
hold the foot switch and press and hold the
function enable switch on the control handle at
the same time.
4 Move the control handle according to the
markings on the control panel.
40
To Position Powered Extension Deck
(if equipped)
1 Press the powered
extension deck function
button.
2 Move the control handle
in the direction indicated
on the control panel.
Note: The drive and lift function are disabled when
the extension deck is deployed and/or when the
platform gates are in the open position. The
extension deck must be in the stowed position and
the platform gates fully closed before operating the
drive and lift functions.
Note: The powered extension deck extend and
retract functions are disabled when the platform
gates are in the open position. The platform gates
must be fully closed before operating the powered
extension deck extend and retract functions.
To Position Platform Extension Deck
1 Lift the platform extension lock handle to the
horizontal position.
2 Push the platform extension lock handle to
extend the platform to the desired position.
3 Pull the platform extension lock handle to
retract the platform to the desired position.
Do not stand on the platform extension deck during
deployment.
4 Lower the platform extension lock handle to
lock the extension platform in place.
Note: The drive and lift function are disabled when
the extension deck is deployed and/or when the
platform gates are in the open position. The
extension deck must be in the stowed position and
the platform gates fully closed before operating the
drive and lift functions.
GS-2646 AV • GS-2646 AV35
Second Edition • Second Printing
Part No. 1274894GT