Table of Contents
Advertisement
Third Edition • First Printing
Work Ar ea Safety
Tip-over Hazards
Do not use the Super-Straddle except with a Genie
AWP.
Do not use on a sloping surface unless all four
swivel casters are locked in a position crossing the
slope and their brakes are applied.
Do not operate the Super-Straddle unless all four
Genie AWP outriggers are properly installed in the
Super-Straddle base, screw jack pads are in firm
contact with the ground and the straddle platform
is level.
Do not operate the machine unless all retaining
pins are properly installed.
Do not operate the Super-Straddle, or adjust or
remove outriggers when the platform is occupied
or elevated.
Do not operate the machine on a slope unless it is
positioned with the length running with the slope
and the straddle platform is level.
Part No. 1298031GT
Do not use the Genie Super Straddle outdoors.
Some Genie AWP outriggers are rated for outdoor
use. When using these outriggers with the
Super-Straddle, the Super-Straddle must only be
used indoors.
Do not move or operate the machine on stairs.
Do not push off or pull toward any object outside of
the platform.
When raising the AWP platform, follow the ratings
for allowable side force and number of occupants
in the Genie AWP operator's manual.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not alter or modify a mobile elevating work
platform without prior written permission from the
manufacturer.
Use only Genie approved replacement parts.
Collision Hazards
Be aware of overhead obstructions. The
Super-Straddle adds 4 ft / 1.2 m to the working
height of the Genie AWP being used.
Crushing Hazards
Keep hands away from end frame plates and
moving parts when lowering the Super-Straddle.
Electrocution Hazards
The Super-Straddle is not electrically insulated and
neither by itself or together with the Genie AWP
will not provide protection from contact with or
proximity to electrical current.
Super-Straddle
Operator's Manual
Work Area Safety
7
Advertisement
Table of Contents
