Work Area Safety - Genie Super-Straddle Operator's Manual

Second Edition • First Printing
Tip-over Hazards
Do not use the Super-Straddle except with a Genie
AWP.
Do not use on a sloping surface unless all four
swivel casters are locked in a position crossing the
slope and their brakes are applied.
Do not operate the Super-Straddle unless all four
Genie AWP outriggers are properly installed in the
Super-Straddle base, screw jack pads are in firm
contact with the ground and the straddle platform is
level.
Do not operate the machine unless all retaining pins
are properly installed.
Do not operate the Super-Straddle, or adjust or
remove outriggers when the platform is occupied or
elevated.
Do not operate the machine on a slope unless it is
positioned with the length running with the slope
and the straddle platform is level.
Do not move or operate the machine on stairs.
Do not use the Genie Super Straddle outdoors.
Part No. 133409
When raising the AWP platform, follow the ratings
for allowable side force and number of occupants in
the Genie AWP operator's manual.
Some Genie AWP outriggers are rated for outdoor
use. When using these outriggers with the
Super-Straddle, the Super-Straddle must only be
used indoors.
Collision Hazards
Be aware of overhead obstructions. The
Super-Straddle adds 1.2 m to the working
height of the Genie AWP being used.
Crushing Hazards
Keep hands away from end frame plates and
moving parts when lowering the Super-Straddle.
Electrocution Hazards
The Super-Straddle is not electrically insulated and
neither by itself or together with the Genie AWP
will not provide protection from contact with or
proximity to electrical current.
Super-Straddle
Operator's Manual

Work Area Safety

5