Connecting As A Telnet Client - Extron electronics FOX Matrix 320x User Manual

After verifying that the IP address change was successful, enter and issue the arp –d
6.
command at the Command prompt. For example:
arp –d 192.168.254.254
or
arp –d*

Connecting as a Telnet Client

The Microsoft Telnet utility is available from the
SIS commands to the FOX matrix switcher from the PC via the Ethernet link and the LAN.
Access the
1. On the Windows task bar, click
2. At the
3. Click the
4. At the
display similar to the one shown in figure 52.
Microsoft (R) windows 2000 (TM) Version 5.0 (Build 2195)
Welcome to Microsoft Telnet Client
Telnet Client Build 5.00.99203.1
Escape Character is 'CTRL+]'
Microsoft Telnet>
Figure 52.
removes 192.168.254.254 from the ARP table
removes all static IP addresses from the ARP table.
prompt and start Telnet as follows:
Command
Start
prompt, type
Open command
button.
OK
prompt, type
Command Telnet
Telnet Window
FOX Matrix 320x and FOX Matrix 14400 • Ethernet Connection
prompt. Telnet allows you to input
Command
> .
Run
.
and then press <Enter>. The computer returns a
85