Table of Contents
Advertisement
You can turn off local echo by typing
Telnet prompt. If you are connected to the FOX matrix switcher and need to access the
Telnet prompt to turn local echo off, type the Escape character (
Set carriage return-line feed
Unless commanded otherwise, Telnet transmits a line feed character only (no carriage
return) to the connected switcher when you press the <Enter> key. This is the correct
setting for SIS communication with the switcher. The Telnet
Telnet to transmit carriage return and line feed characters when <Enter> is pressed, but if
crlf is set, the SIS link with the switcher does not function properly.
Close
To close the link to the switcher, access the
(
<
Help
For Telnet command definitions, at the
Quit
Exit the Telnet utility by typing
are connected to the FOX matrix switcher, access the
character (
Subnetting — A Primer
It is not the purpose of this guide to describe TCP/IP protocol in detail. However, some
understanding of TCP/IP subnetting (a subnet is a subset of a network — a set of IP devices
that have portions of their IP addresses in common) is necessary in order to understand
the interaction of the FOX matrix switcher and the mail server gateway. To understand
subnetting at the level required to install and operate the FOX matrix switcher, you must
understand the concepts of a gateway, local and remote devices, IP addresses and octets,
and subnet masks and octets.
Gateways
The FOX matrix switcher can communicate with the email server that the switcher uses
for email notification directly (if they are on the same subnet) or the communication can be
routed via a gateway (a computer that provides a link between different subnets).
Local and Remote Devices
The local and remote devices are defined from the point of view of the function being
described. In this guide, subnetting is an issue when you are using the controlling PC to set
TCP/IP and email values in the matrix switcher (see
page 43 and
email notification, which may include subnetting, the matrix switcher is the local device and
the email server is the remote device.
Ctrl
+
]
). At the Telnet prompt, type close, and then press <Enter>.
>
<
>
Ctrl
+
]
).
<
>
<
>
Email Settings Page
FOX Matrix 320x and FOX Matrix 14400 • Ethernet Connection
unset local_echo
prompt by typing the Escape character
Telnet
prompt, type
Telnet
and then pressing <Enter> at the
quit
Telnet
IP Settings / Options Dialog Box
on page 66). When you are setting up the variables for
and then pressing <Enter> at the
Ctrl
+
]
).
<
>
<
>
command forces
set crlf
and then press <Enter>.
?
prompt. If you
Telnet
prompt by typing the Escape
on
87
Advertisement
Table of Contents
