Uploading Html Files - Extron electronics FOX Matrix 320x User Manual

Uploading HTML Files

You can create customized HTML pages for the switcher to display. The
dialog box (see figure 26), accessible via the
contents of the file system of the switcher and upload custom HTML pages to the switcher.
1 1
Figure 26.
Upload HTML pages as follows:
NOTES:
• The files listed in figure 26 are shown for example only and may not be present on
your switcher.
• The
not the location to replace the firmware that controls all switcher operation (see
Updating
The HTML language reserves certain characters for specific functions (see
•
Characters
1. Connect the PC to the matrix switcher via any of the serial ports or the Ethernet port of
the switcher.
2. Start the Matrix Switchers Control Program and connect to the FOX matrix switcher
(see Using the Matrix Switcher Control
page 40).
3. Click
Tools
4. Click the
dialog box opens.
5. Navigate to the folder where you saved the HTML files. Select the files.
NOTES:
•
•
Click the
6.
minutes.
7. Click the
8. Click the
2 2
HTML Files List Dialog Box
dialog box is for inserting your own HTML pages. This is
HTML Files List
Firmware, on page 48, to replace the firmware).
on page 35).
>
HTML File Manager
Pick File(s) to Load to Server
To select multiple files, hold the <Ctrl> key while you select the desired files.
If you want one of the HTML files that you created to be the default start-up
page, name the file "
index.html
for that file name when you first connect to it using an Internet browser.
button. Uploading the files to the FOX matrix switcher may take a few
Open
button to confirm the upload (
Update
button to exit the
Close HTML Files List
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software
menu, provides a way to view the
Tools
3 3
Software, steps 1 through 4, starting on
.
button (see figure 26,
." The FOX matrix switcher automatically looks
).
2
dialog box (
HTML Files List
Special
1 ). An
Open File
).
3
51