Connecting To The Usb Port - Extron electronics DTP2 T 212 User Manual

Connecting to the USB Port

The mini-B USB port is located on the front panel of the DTP2 T 212 (see figure 8). Use this
port to configure the transmitter via SIS commands or PCS.
1.
If this is the first time connecting a DTP2 T 212 to this USB port on your computer, the
Found New Hardware Wizard opens.
2.
Connect a USB A to mini-B cable between the USB Config port on the transmitter front
panel and the USB port on a computer.
AUTO
SWITCH
1
R
CONFIG
MODE
DTP2 T 212 Front Panel
Figure 8. USB Port Connection
On the first screen, indicate if it is necessary to connect to Windows Update to search
the web for the driver needed to communicate with the transmitter via the USB port.
This is not necessary if the USB driver already exists on your computer.
Figure 9. Found New Hardware Wizard Opening Screen
Select the Yes, this time only radio button (see figure 9,
•
computer to connect to Windows Update this one time.
Mini Type B Type A
USB
USB Cable
INPUTS
INPUTS OUTPUTS
1 2 A
2
SIGNAL
HDCP
NORM/AUTO
1 1
3 3
4 4
WiFi 1 2 3 4
USB
USB
Ports
B
DTP2 T 212
PC
2 2
) if you want your
1
DTP2 T 212 • Operation 17