Table of Contents
Advertisement
Uploading Firmware to the Switcher
To load a new version of firmware to the switcher using PCS:
1.
Connect a computer to the DTP2 T 212 via the front panel USB port (see
to the USB Port
2.
If computer does not have PCS installed, download and install PCS to the computer
(see
Downloading PCS from the Extron Website
3.
If necessary, download the latest version of DTP2 T 212 firmware and install it on the
computer (see
Open PCS via the desktop Start menu, desktop icon, or toolbar icon. Unless changed
4.
in the installation of PCS, make the following selection from the Start menu:
Start > All Programs > Extron Electronics > Extron Product Configuration
Software > Extron Product Configuration Software
The Product Configuration Software window opens to the Device Discovery
screen (see figure 31).
Figure 31.
5.
Select the DTP2 T 212 by clicking on it to highlight it in the list (see figure 31,
6.
Click Connect (
on page 17).
Downloading DTP2 T 212 Firmware
PCS Device Discovery Screen
).
2
on page 22).
on page 33).
DTP2 T 212 • Configuration Software
Connecting
).
1
34
Advertisement
Table of Contents
